Lithuania Rubber seal flange gasket DN80X5
Category:
LithuaniaFlange type interface rubber sealing ring
+86-19903282672
Product Description
1. Flange rubber gasket is an integrally formed circular part, and its size and deviation meet and meet the requirements of national standard GB/T9119-2010 and "mold and pressure" dimensional tolerance (GB/T3672-M3) of solid rubber products.
2. The flange rubber gasket should be free of bubbles and surface defects that affect its performance, and the bonding edge at the mold joint should be kept at a reasonable minimum.
3. The rubber, accelerator, antioxidant and vulcanizing agent used in the flange rubber gasket shall be non-polluting materials, and the sanitary performance of the flange rubber gasket shall be improved, which shall conform to the provisions of the Safety Evaluation Standard for Drinking Water Transmission and Distribution Equipment and Protective Materials (GB/T 17219-1998).
4. The physical properties of flange rubber sealing gaskets shall meet the requirements of "Specification for Rubber Seals Interface Sealing Ring Materials for Water Supply, Drainage and Sewage Pipelines" (GB/T21873)-2008. 100% of the rubber used to make EPDM flange rubber gaskets is pure EPDM rubber, and it is not allowed to use or mix ordinary rubber and recycled rubber.
5. The marking, packaging, transportation and storage of flange rubber gaskets should comply with the general provisions of rubber sealing products, packaging, transportation and storage (GB/T5721-93).
Product Parameters
| Specifications | D | d | h | Net weight (kg) | ||
| PN10 | PN16 | PN10 | PN16 | |||
| DN80 | 132-2.0 | 132-2.0 | 80 2.0 | 3 0.5-0.3 | 0.037 | 0.037 |
| DN100 | 156-2.0 | 156-2.0 | 100 2.0 | 3 0.5-0.3 | 0.051 | 0.051 |
| DN150 | 211-2.0 | 211-2.0 | 150 2.0 | 3 0.5-0.3 | 0.068 | 0.068 |
| DN200 | 266-2.0 | 266-2.0 | 200 2.0 | 3 0.5-0.3 | 0.127 | 0.127 |
| DN250 | 319-3.0 | 319-3.0 | 250 3.0 | 3 0.5-0.3 | 0.148 | 0.148 |
| DN300 | 370-3.0 | 370-3.0 | 300 3.0 | 4 0.5-0.3 | 0.200 | 0.200 |
| DN350 | 429-3.0 | 429-3.0 | 350 3.0 | 4 0.5-0.3 | 0.250 | 0.250 |
| DN400 | 480-3.0 | 480-3.0 | 400 3.0 | 4 0.5-0.3 | 0.289 | 0.289 |
| DN450 | 530-3.0 | 530-3.0 | 450 3.0 | 4 0.5-0.3 | 0.314 | 0.416 |
| DN500 | 582-4.0 | 582-4.0 | 500 3.0 | 4 0.5-0.3 | 0.460 | 0.529 |
| DN600 | 682-4.0 | 682-4.0 | 600 3.0 | 5 0.5-0.3 | 0.552 | 0.847 |
| DN700 | 794-4.0 | 794-4.0 | 700 3.0 | 5 0.5-0.3 | 0.652 | 0.652 |
| DN800 | 901-4.0 | 901-4.0 | 800 3.0 | 5 0.5-0.3 | 0.913 | 0.913 |
| DN900 | 1001-5.0 | 1001-5.0 | 900 3.0 | 5 0.5-0.3 | 1.003 | 1.003 |
| DN1000 | 1112-5.0 | 1112-5.0 | 1000 3.0 | 5 0.5-0.3 | 1.338 | 1.338 |
| DN1100 | 1218-6.0 | 1218-6.0 | 1100 3.0 | 5 0.5-0.3 | 1.475 | 1.475 |
| DN1200 | 1328-6.0 | 1328-6.0 | 1200 3.0 | 5 0.5-0.3 | 1.500 | 1.500 |
